The first type of hydraulic press cooler is a series of tube types, including double tube, vertical, horizontal, floating head, and more. The characteristic of this type is that the water used for cooling flows through the inside of the pipe, while the oil flows through the intervals of the pipes. The folding plate set in the middle allows the oil to flow in a zigzag manner, and the two-way or even four-way flow method used makes its cooling effect even stronger.
A tubular cooler consists of two main parts: an external shell and an internal cooler body. Due to differences in specific structural methods, external connection forms can be divided into pipe threaded and flange types; Divided into horizontal and vertical installation forms; Divided into floating disc type and floating head type in terms of floating form; The cooler tube structure can be divided into spiral tube type and finned tube type; There are various structural forms of baffles, including bow shaped baffles, rectangular baffles, double weir shaped baffles, and circular baffles, all of which are selected according to specific conditions.
The external shell includes a cylinder, a water distribution cover, and a return water cover. It is equipped with inlet and outlet pipes, as well as inlet and outlet pipes, and is equipped with oil discharge, drainage, exhaust plugs, zinc rod installation holes, and thermometer interfaces.
The cooler body is composed of cooler tubes, fixed orifice plates, movable orifice plates, baffle plates, etc. The two ends of the cooler tube are connected to the fixed and movable orifice plates, and there is oil leakage inside the cooler of the cooler loader; The fixed hole plate is connected to the outer body flange, and the movable hole plate can freely expand and contract inside the outer body to eliminate the influence of temperature on the cooler tube due to thermal expansion and contraction.
Feb 03, 2024
Composition Of Tubular Cooler
Previous
Send Inquiry






