What is the structure of Industrial air cooled spot cooler
Industrial Spot Cooler Air Conditioner is mainly composed of the following structures:
1. Refrigeration system
Compressor: It is the core component of the refrigeration system. Its function is to compress the low-temperature and low-pressure refrigerant gas into high-temperature and high-pressure gas, provide power for the refrigeration cycle, and make the refrigerant circulate continuously in the system.
Condenser: Usually composed of heat pipes and heat fins, the high-temperature and high-pressure refrigerant gas exchanges heat with the outside air here, dissipates the heat, and cools and condenses into a high-temperature and high-pressure liquid.
Evaporator: In contact with the local area or equipment that needs to be cooled, the liquid refrigerant evaporates in the evaporator and absorbs heat, lowering the ambient temperature to achieve a cooling effect.
Throttling device: such as a capillary tube or an expansion valve, its function is to throttle and reduce the pressure of the high-temperature and high-pressure liquid refrigerant flowing out of the condenser, turning it into a low-temperature and low-pressure liquid refrigerant, which enters the evaporator to evaporate and absorb heat.
2. Air circulation system
Fan: Axial flow fans or centrifugal fans are generally used to provide power for air flow, allowing air to quickly pass through the cooling fins or heat exchanger of the cooler to enhance the heat exchange effect.
Air duct: A channel that guides air flow, usually made of metal or plastic, to ensure that air flows along the designed path and improve air circulation efficiency.
Air filter: installed at the entrance of the air duct, used to filter dust, impurities, etc. in the air to prevent them from entering the cooler and affecting the heat exchange effect and normal operation of the equipment.
3. Control system
Temperature sensor: monitors the temperature of the cooled area in real time and transmits the temperature signal to the controller.
Controller: Based on the signal from the temperature sensor, it compares it with the set temperature value, and adjusts the cooling capacity and air flow by controlling the start and stop of the compressor, the speed of the fan, etc. to achieve the set cooling temperature.
4. Housing and bracket
Shell: Generally made of metal, such as stainless steel or galvanized steel plate, with good strength and corrosion resistance, can protect internal refrigeration system, air circulation system, control system and other components, while also playing a dust-proof and waterproof role.
Bracket: used to support and fix the cooler so that it can be stably installed at the industrial production site. It can be customized according to actual needs to adapt to different installation environments and requirements.
If you want to know more about the structural composition of Industrial Portable Air Cooled Air Conditioners, please contact Dongxia Machinery . Our technical team will tailor the most suitable product solution for you.







